EU Puiteohjelmat

EU Puiteohjelmista voi hakea rahoitusta erilaisiin kansainvälisiin tutkimus- ja kehittämishankkeisiin. Rahoitettavan hankkeen tulee sopia EU:ssa yhteisesti määritettyihin tutkimustavoitteisiin. Puiteohjelmista saa lisätietoa Tekesin EU-hankesivuilta.

Puiteohjelmahankkeessa on oltava mukana vähintään kolme organisaatiota kolmesta eri maasta. Käytännössä minimivaatimus on riittämätön. Organisaatio voi olla yritys, yliopisto tai tutkimuslaitos. Hankkeen EU-rahoitusosuus on noin 50%.

EU Puiteohjelmista rahoitettuja valimoalaa lähellä olevia hankkeita, joissa on ollut mukana suomalaisia kumppaneita:

  • 2006-2010 New Automotive components Designed for and manufactured by Intelligent processing of light Alloys Cordis haku »
  • 2006-2009 Grain size control in steel by means of dispersed non-metallic inclusions Cordis haku »
  • 2004-2006 Integrated design and product development for the eco-efficient production of low-weight aeroplane equipment (IDEA) Cordis haku »
  • 2003-2005 Automatic moulding, casting and cleaning line for manufacturing prototype castings and billets in an environmentally friendly robotic cell, GROWTH Cordis haku »
    2003-2005 Lost foam adi cast iron synergy for high performance complex component, GROWTH Cordis haku »
  • 2002-2004 Production line integrated sensor system for porosity quality control of magnesium die castings, GROWTH Cordis haku »
  • 2002-2005 Extension of advanced monitoring and control techniques at continuous casting process, ECSC-STEEL C Cordis haku »2002-2005 Hearth protection in blast furnace operation by injection of TiO2-materials, ECSC-STEEL C Cordis haku »
  • 2001-2004 In-time rating of continuously cast semis by means of hybrid quality models, ECSC-STEEL C Cordis haku »
  • 2001-2004 Metal By-Product Recovery in Induction Furnaces - Commercial, Environmental and Technical Solutions, GROWTH Cordis haku »
  • 2000-2003 Investigation of accretion formation in blast furnace shaft, ECSC-STEEL C Cordis haku »
  • 2000-2003 New joining techniques for light magnesium components, GROWTH Cordis haku »
  • 1999-2001 Rapid micro-prototyping, BRITE/EURAM 3 Cordis haku »
  • 1999-2002 Consistent BOS performance, ECSC-STEEL C Cordis haku »
  • 1999-2002 Improved process control of hot metal production through a non-intrusive, on-line sensing system for metals intopgas of blast furnace (PROCSSYMO), ECSC-STEEL C Cordis haku »
  • 1999-2002 New ways to improve longitudinal temperature homogeneity of slabs in reheating furnaces, ECSC-STEEL C Cordis haku »
  • 1999-2003 Improvement of special steel production by use of "endless lining" system for monolithic ladle linings, ECSC-STEEL C Cordis haku »
  • 1999-2003 Rapid prototyping and tooling industrial applications, BRITE/EURAM 3 Cordis haku »
  • 1998-2000 Development of a low cost processing route for the manufacture of high wear resistant aluminium castings, BRITE/EURAM 3 Cordis haku »
  • 1998-2001 Above burden & in burden probe data interpretation by neural network based model to improve blast furnace control, ECSC-STEEL C Cordis haku »
  • 1998-2001 Determination of high temperature surface crack formation criteria in continuous casting and thin slab casting, ECSC-STEEL C Cordis haku »
  • 1998-2001 Development of new Technology for the production of near net shape adi-parts, BRITE/EURAM 3 Cordis haku »
  • 1998-2001 Foundry environment, waste materials-foundry waste, BRITE/EURAM 3 Cordis haku »
  • 1998-2001 Improved control of segregation in continuous casting & hot rolling processes, ECSC-STEEL C Cordis haku »
  • 1998-2001 Improvement of casting fluxes & slags by minimization of environment-polluting & corrosive contituents (fluorine, alkali), ECSC-STEEL C Cordis haku »
  • 1998-2001 Investigation of vacuum ultra violet optical emission spectrometry for the determination of low levels of C, N, O and H, ECSC-STEEL C Cordis haku »
  • 1998-2001 Investigations of chlorine and alkali behaviour in the blast furnace and optimisation of blast furnace slag with respect to alkali retention capacity, ECSC-STEEL C Cordis haku »
  • 1998-2001 Safe and economic machining of magnesium castings, BRITE/EURAM 3 Cordis haku »
  • 1998-2002 Electrical actuator with brushless / sensorless permanent magnet synchronous motor for aircraft and submarine application, BRITE/EURAM 3 Cordis haku »
  • 1988-2002 Microstructural engineering by solidification processing, BRITE/EURAM 3 Cordis haku »
  • 1998-2002 New efficient steel technologies, BRITE/EURAM 3 Cordis haku »
  • 1997-2000 Application of surface and internal quality forecasting and casting engineering monitoring to the online quality prediction of continuously cast semis, ECSC-STEEL C Cordis haku »
  • 1997-2000 Measurement and modelling of crater end position and shape during transient casting conditions, ECSC-STEEL C Cordis haku »
  • 1997-2000 New generation wind turbine blade, NNE-JOULE C Cordis haku »
  • 1996-1997 Development of a low cost processing route for the manufacture of high wear resistant aluminium castings, BRITE/EURAM 3 Cordis haku »
  • 1996-1998 Resource Minimized Casting by Development of a Modular Moulding Box System, BRITE/EURAM 3 Cordis haku »
  • 1996-1999 Development of high speed casting in conventional CC stainless steel slab production, ECSC-STEEL C Cordis haku »
  • 1996-1998 On-Line Sensing for Integrated Monitoring the Reactions and Processes in Industrial Scale Metallurgical and Mineral Processing Furnaces, BRITE/EURAM 3 Cordis haku »
  • 1996-1999 Control of ejections caused by bubble bursting in secondary steel-making processes, ECSC-STEEL C Cordis haku »
  • 1996-1999 Process Chains for Rapid Technical Prototypes, BRITE/EURAM 3 Cordis haku »
  • 1995-1998 Control of liquid slag carry-away and entrapment in the CC mold for a better surface and subsurface quality: numerical and experimental study, ECSC-STEELRES 8C Cordis haku »
  • 1995-1998 Improved atmosphere control for product quality and combustion efficiency in reheating furnaces, ECSC-STEELRES 8C Cordis haku »
  • 1995-1998 Improvement of internal quality by controlling the microstructure of microalloyed cast steel, ECSC-STEELRES 8C Cordis haku »
  • 1993-1997 Modelling in materials science and processing, COST Cordis haku »
  • 1990-1993 Advanced metal working using electromachinable ceramic extrusion dies, BRITE/EURAM 1 Cordis haku »
  • 1990-1993 Reduction of design to product lead time through instant manufacturing of models, prototypes and tools, BRITE/EURAM 1 Cordis haku »
  • 1988-1991 Fatigue properties of high strength aluminium transition metal base alloys produced by rapid solification processing, EURAM Cordis haku »
  • 1988-1991 Measurement and evaluation of thermochemical and thermophysical properties to provide a database for the development of new light alloys, COST Cordis haku »
  • 1983-1986 Advanced casting and solidification technology, COST Cordis haku »
  • 1981-1995 Advanced materials for power engineering components, COST Cordis haku »

Tekesin EU-hankesivut englanniksi/more information in English: the Finnish Secretariat for EU R&D